How to Build a Royal Rife Machine

The Royal Rife machine is an invention by American scientist Royal Rife. This machine is famous in natural health circles for its supposed ability to use sound frequencies to treat and reportedly cure almost any known disease or health condition. Rife believed that nearly all adverse health conditions are caused by viruses, and that these viruses can be destroyed by certain frequencies of sound, depending on the condition being treated. As of November 2010, a Rife machine can cost between $350 and $2,700. However, you can build one on your own for a fraction of the cost.

Instructions

Put Together the Rife Machine

1

Drill a 1/8-inch hole in the center of each of the two brass plates.

2

Cut the speaker wire into two pieces of 12 feet each.

3

Strip the casing from the two pieces of speaker wire using the wire stripper. Leave 1/2-inch of bare wire at the end of each piece of wire.

4

Put one end of one of the bared wires into one of the crimp ring connectors, making sure it fits snugly and securely.

5

Secure the crimp ring connector to one of the drilled brass plates using one of the pop rivets.

6

Separate the two bared strands at the end of the speaker wire. Solder the first strand to the tip of the amplifier jack, then solder the second strand to the jack itself.

7

Repeat steps two through six with the second 12 foot strand of wire.

Activate the Rife Frequency Software Kit

8

Plug the amplifier into the associated jack.

9

Open up the software kit and remove the stereo output line that comes with it. Plug one end of this line into the headphone port on your computer. Plug the other end of the line into the auxiliary output port on the amplifier.

10

Attach one end of the power adapter into the amplifier and plug the other end into a wall outlet.

11

Install the Rife software kit on your Windows-based computer (the software will not work with a Mac).

Use the Rife Machine

12

Place one brass plate under one of your feet. Place the other brass plate on any nearby flat non-metal surface and put the palm of your hand on top of the plate.

13

Run the Rife software on your computer.

14

Turn up the volume on your computer until you can feel a slight tingling in the foot and hand that are on the brass plates.

15

Use the software to set the sound frequency to one that will address whatever health condition you're treating with the Rife machine. The software kit comes with a list of frequencies for hundreds of health conditions.

16

Sit still until the frequency plays all the way through to the end, then rest for a few minutes before getting up. Repeat the treatment process daily until you feel better.